Premium Oilfield Technologies has a full line of 7500 psi and 5000 psi mud valves designed for high pressure, extreme service applications. The valve and parts are compatible and interchangeable with Demco mud valves. Each valve is fully assembled and tested in our manufacturing facility prior to shipment.

We stock major and minor spare parts kits for all of the below mud valves, for 1-1/2", 2", 3”, 4”, and 5" bores.

VIEW BROCHURE

Mud Valve Products

  • NV-7500 Mud Gate Valve
  • MR-7500 PSI MUD VALVE
  • MR-50D 5000 psi Mud Valve
  • MR-50T 5000 psi Mud Valve
  • Patriot Gate Valve Seat
  • Spares Kits
image

The NV-7500 Mud Gate Valve is a full metal to metal sealing gate valve for use in applications up to 7500 psi. The NV-7500 uses single piece seat rings creating an upstream metal to metal seal. The upstream design helps eliminate debris contamination into the valve body and reduces wear on the internal components.

The NV-7500 is part-for-part compatible with the Demco 7500 psi mud valve. 

Features:

  • Single Piece Seat/Belville Spring design
  • Metal to Metal Sealing
  • Upstream sealing (Reduced solids in valve cavity)
  • Interchangeable Demco upper section (Bonnet)
  • Special Urethane stem packing
  • Stainless steel stem, gate and seats. Forged bonnet
  • Certs available up to API PSL-2

Applications:

  • 7500 PSI Mud Systems
  • Standpipe Manifolds
  • MPD Manifolds
  • Bleed Lines
  • 2” and 4” Full Bore, 1502, BWP or Flanged

VIEW THE NV7500 2" VALVE SPEC SHEET  VIEW THE NV7500 4" VALVE SPEC SHEET

image

The MR-7500 valve and parts are compatible and interchangeable with Demco mud valves. Each valve is fully assembled and tested in our U.S. manufacturing facility prior to shipment. We also stock major and minor spare parts kits for all of the below mud valves, for 1-1/2", 2", 3", 4" and 5" bores.

Features:

  • Designed to be repaired without taking valve offline. This is accomplished through our removable bonnet design.
  • Seats are made with a long lasting elastomer that is bonded to two stainless steel inserts and a locking device that insures proper alignment when installing the seat.
  • Replaceable seat rings that wear instead of the valve body, thus extending service life of the valve.
  • Valves and our repair kits are 100% interchangeable with our competitors on a part to part and unit to unit basis.
  • Stainless steel trim is standard on all valves, for high performance in corrosive applications.
  • Major and minor spare parts kits for 1.5", 2", 3", 4" and 5" mud valves are stocked.
  • Available with Patriot ultra-high-performance elastomer seats.  Extends life approximately 30% longer than OEM seats.

Mud Valve Models Available Include:

  • MR-7500, 7500 psi, high pressure
  • MR-500, 5000 psi
  • MR-50T, 5000 psi
image

The MR-50D is a 5000 psi mud valve that is designed to be compatible with spare parts made for the Demco 5000 psi mud valve.

Sizes:

  • 2" connection, 2" bore
  • 3" connection, 3" bore
  • 4" connection, 4" bore
  • 5" connection, 4" bore
image

The MR-50T is designed to seal under pressures of up to 5000 psi. Parts are 100% compatible with the Oteco 5000 psi mud valve.

Sizes:

  • 2" connection, 2" bore
  • 3" connection, 3" bore
  • 4" connection, 4" bore
  • 5" connection, 4" bore
image

Premium Oilfield Technologies new Patriot Gate Valve Seat utilizes our proprietary X7500 elastomer resulting in much higher resistance to abrasives and chemicals. This new seat added to Premium’s existing high-quality spares kits will reduce the number of rebuilds and lower overall cost of ownership.

Features:

  • Higher tensile strength 
  • Higher abrasion resistance 
  • Stainless steel rings for corrosion/erosion resistance 
  • Increased surface area to strengthen bond of elastomer 
  • Bottom plate allows for easier alignment
  • Pressure energized sealing 
  • H2S resistant materials

VIEW SPEC SHEET  

image

Premium stocks major and minor spare parts kits in both 5000 and 7500 psi applications for the following mud valve designs: Demco, Baker/Forum, Oteco, and Anson.

Sizes include:

  • 1.5" bore
  • 2" bore
  • 3" bore
  • 4" bore
  • 5" bore