RCD Products
- RCD T-3000
- RCD T-2000
- RCD-1000
- RCD 2000
- Intermediate Pressure RCD
Features:
- Low profile RCD measuring 43” tall with bearing assembly installed
- High pressure: 3000 psi static / 1800 psi @ 100 rpm
- Hands-free bearing latch system – no HPU required
- Self-lubricated and sealed bearing assemblies with oil level inspection port
- 9” pass through for up to 6-5/8” drillpipe
- Rated for up to 220 rpm
- Quick change sealing element system
Specifications:
| Dimensions | Low profile – 43” OAL with bearing assembly |
| Pressure Rating | 3000 psi static, 1800 psi dynamic |
| RPM Rating | 220 rpm max |
| Bearing Lubrication | Self-lubricated bearing – integrated reservoir |
| Latching Mechanism | Fail safe closed – hydraulic latch (no HPU required) |
| Bottom Flange | 13-5/8” 5K or 11” 5K |
| Outlet Flanges | (2) 4-1/16” 5K, 7-1/16” 3K, 9” 3K |
| Sealing Elements | Single or dual elements – nitrile, polyurethane – slip on style |
Features:
- Low profile RCD measuring 33.25” tall with bearing assembly installed
- High pressure: 2000 psi static / 1200 psi @ 100 rpm
- Hands-free bearing latch system – no HPU required
- Self-lubricated and sealed bearing assemblies with oil level inspection port
- 9” pass through for up to 6-5/8” drillpipe
- Rated for up to 220 rpm
- Quick change sealing element system
Specifications:
| Dimensions | Lowest profile – 33.25” OAL with bearing assembly |
| Pressure Rating | 2000 psi static, 1200 psi dynamic |
| RPM Rating | 220 rpm max |
| Bearing Lubrication | Self-lubricated bearing – integrated reservoir |
| Latching Mechanism | Fail safe closed – hydraulic latch (no HPU required) |
| Bottom Flange | 13-5/8” 5K |
| Outlet Flanges | 4-1/16” 5K, 9” 2K |
| Sealing Elements | Single element – nitrile, polyurethane – slip on style |
The RCD 1000 is our low pressure rotating control device. It is one of the most compact systems available with 20” total head height, including bearing assembly. All RCD installations customizable to client/rig specifications. RCD head height under the rig floor is customizable.
Features:
- Flowlines (8” – 14”)
- Air valves available (7”, 9” and 11”)
- No Kelly Driver needed
- Maintenance free sealed bearing design
- No oiler needed
- Duel hinged clamp system
- Reduces working area under rig
- Pneumatic clamp available
- Single point access to remove bearing
- Tapered design self-aligns during installation
The RCD 2000 is our intermediate pressure rotating control device. It is one of the most compact systems available with 20” total head height, including bearing assembly. All RCD installations customizable to client/rig specifications. RCD head height under the rig floor is customizable.
Features:
- Flowlines (8” – 12”)
- Air valves available (7”, 9” and 11”)
- No Kelly Driver needed
- Maintenance free sealed bearing design
- No oiler needed
- Duel hinged clamp system
- Reduces working area under rig
- Pneumatic clamp available
- Single point access to remove bearing
- Tapered design self-aligns during installation
The Cutter intermediate RCD is capable of 1500 working PSI at 50 RPMs and static hold at 2000 PSI.
Features:
- Variety of sizes for bottom flange
- 9-2m outlet studded / orbit valve bolts directly to head
- 7-3m outlet
- 4-5m outlet
- 2” nipple for fill-up line
- Dual hinge pneumatic clamping system with secondary safety features
- Pre-studded outlets for convenience when attaching flow line or optimal orbit valve
- 1000/1500 PSI
- Use with manual or pneumatic clamps